HQ Power VDPLW2300, User Manual

Page: 6 / 33

VDLPW2300_v2
HQPOWER 6
the cursor is flashing after the letter “
f
”, press the wheel and adjust the fade time of chase 8. Press again to
confirm. When the cursor is flashing after the letter “
s
” (
Chase 8 s_*** f **
), press the wheel and adjust the speed
of chase 8. Press again to confirm. Repeat this operation to program chases 1 ~ 7.
DMX Mode Group
The LEDs of your
VDPLW2300
are evenly divided into 8 square blocks, which can be grouped. To set a group,
press the jog wheel and scroll to
DMX Mode 3channel/6channel
. Press the wheel again to enter. Rotate the wheel
to the right to select the 6-channel mode; rotate to the left to select the 3-channel mode.
DMX protocol for the 3-channel mode:
DMX Channel Function
Channel 1 0 ~ 100% dimmer RED
Channel 2 0 ~ 100% dimmer GREEN
Channel 3 0 ~ 100% dimmer BLUE
DMX protocol for the 6-channel mode:
DMX Channel Function
0 ~ 4 no function
5 ~ 5 full on
6 ~ 247 effects
Channel 1
248 ~ 255 full on
Channel 2 0 ~ 255 dimmer RED
Channel 3 0 ~ 255 dimmer GREEN
Channel 4 0 ~ 255 dimmer BLUE
0 ~ 4 no function
5 ~ 253 strobe from slow to fast
Channel 5
254 ~ 255 full on
0 ~ 4 no function
5 ~ 30 program 1
31 ~ 60 program 2
61 ~ 90 program 3
91 ~ 120 program 4
121 ~ 150 program 5
151 ~ 180 program 6
181 ~ 210 program 7
211 ~ 240 program 8
Channel 6
241 ~ 255 sound activation
Combination of Group and Channel Mode
o
8-block/3-channel mode: 1 group of 8 blocks, each block consisting of 3 channels
CH
1-3
CH
1-3
CH
1-3
CH
1-3
CH
1-3
CH
1-3
CH
1-3
CH
1-3
o
4-block/3-channel mode: 2 groups of 4 blocks, each block consisting of 3 channels, each fixture has 6
channels
CH
4-6
CH
4-6
CH
4-6
CH
4-6
CH
1-3
CH
1-3
CH
1-3
CH
1-3