HQ Power VDPLCRGB, User Manual, Page: 5 / 23

VDPLCW HQPOWER
5
5. Use
•
DMX Mode
Set DIP switch no 10 to ON. Address DIP switches no 1 and 9 according to the table below.
SW10 SW9 SW8 SW7 SW6 SW5 SW4 SW3 SW2 SW1 Address
1 0 0 0 0 0 0 0 0 1 1
1 0 0 0 0 0 0 0 1 0 2
1 0 0 0 0 0 0 1 0 0 4
1 0 0 0 0 0 1 0 0 0 8
1 0 0 0 0 1 0 0 0 0 16
1 0 0 0 1 0 0 0 0 0 32
1 0 0 1 0 0 0 0 0 0 64
1 0 1 0 0 0 0 0 0 0 128
1 1 0 0 0 0 0 0 0 0 256
•
Auto Mode
Set DIP switch no 10 to OFF. Set DIP switch no 1 to ON to switch on all LEDs. Set DIP switch no 2 to ON to use the
pre-programmed effects.
•
Sound-Controlled Mode
Set DIP switch no 3 to ON to use the sound-controlled mode. All LEDs will react according to the music through the
built-in microphone.
•
Master/Slave Mode
Set DIP switch no 9 on the master device to ON. Set all other DIP switches to OFF. Set DIP switches no 1 and 10 on
the slave devices to ON. Set all other DIP switches to OFF
•
Detailed DMX Values per Channel
Channel Function From To Description
1 Compartment 1 0 255 Dimmer 0 ~ 100%
2 Compartment 2 0 255 Dimmer 0 ~ 100%
3 Compartment 3 0 255 Dimmer 0 ~ 100%
4 Compartment 4 0 255 Dimmer 0 ~ 100%
0 50 Dimmer 0 ~ 100%
51 101 Flash strobe
102 152 Shadow effect
153 203 Slave mode
5 Dimmer - Strobe
204 255 Sound activation
6 Speed 0 255 From slow to fast
•
DMX512 Connection
Connect the provided XLR cable to the female 3-pin XLR output of your controller and the other side to the male 3-
pin XLR input of the VDPLCW . Multiple VDPLCW s can be linked through serial linking. The linking cable should be a
two-core screened cable with XLR input and output connectors.