VDPC054
V. 01 – 28/06/2013
7
©Velleman nv
Device /
page
Function
Pan
Tilt
Dimmer Colour
Gobo
Strobe
1
1
2
3
4
5
6
2
7
8
9
10
11
12
3
13
14
15
16
17
18
4
19
20
21
22
23
24
5
25
26
27
28
29
30
6
31
32
33
34
35
36
7
37
38
39
40
41
42
8
43
44
45
46
47
48
9
49
50
51
52
53
54
Use fader:
1
2
3
4
5
6
Note:
You can also use the controller for devices with more than 6 DMX
channels. In that case, use multiple pages per device. This possibility is not
further explained in this user manual.
7.
Use
7.1
Start Mode
For all the procedures described below to work correctly, you normally begin
from the start mode. In start mode, the display shows ―— — — —‖. If the
display does not show this, you can return to start mode as follows,
depending on the active operating mode:
press A once
press B once
press and hold A
press and hold SELECT.
7.2
Running in Manual Mode
You can use the controller to manually set DMX values using the faders.
Refer to the documentation of your specific DMX device for more information
on the exact function of the DMX channels.
1.
From start mode, press B once to enter manual mode.
The dot blinks in the PROJ display, which indicates the device/page (1-9)
that is currently active.
2.
Use UP and DOWN to select the desired device/page (1-9).
