VDL360LO3
Rev. 01
09.05.2011
©Velleman nv
3
•
Do not switch the device on immediately after it has been exposed to changes in temperature. Protect the
device against damage by leaving it switched off until it has reached room temperature.
•
This device is designed for professional use on stage, in discos, theatres, etc. The
VDL360LO3
can be used
indoor
(< 45°C, < 50%RH) with an alternating current of 230 VAC~50 Hz. The max. temperature for the
housing is 130°C.
•
There may be some smoke or a particular smell when the device is activated for the first time. This is normal
and any smoke or smell will gradually disappear.
•
Lighting effects are not designed for permanent operation: regular operation breaks will prolong their lives.
•
Use the original packaging if the device is to be transported.
•
Keep this manual for future reference.
4.
Features
•
music-controlled
•
controls: bass, middle, high
5.
Installation
a) Lamps
•
Only fit or replace a lamp when the device is unplugged from the mains.
•
Let a lamp cool down before replacing it.
•
Do not install lamps with a higher wattage than that for which this device was designed.
•
Replace any deformed or damaged lamp with a lamp of the same type.
b) Mounting the Device
•
Have the device installed by a qualified person, respecting EN 60598-2-17 and all other applicable
norms.
•
Install the device in a location with few passers-by that is inaccessible to unauthorised persons.
•
Make sure there is no flammable material within a 50cm radius of the device.
•
Have a qualified electrician carry out the electric connection.
•
Connect the device to the mains with the power plug. Don’t connect it to a dimming pack.
•
The installation has to be approved by an expert before the device is taken into service.
6.
Use
•
Switch the device on and off by means of the ON/OFF switch. Do not operate the device continuously.
•
Adjust the sensitivity of the device by means of the 3 rotary controls (bass, middle and high) until the
reaction of the lamps to the music satisfies you.
7.
Cleaning and Maintenance
1.
All screws should be tightened and free of corrosion.
2.
The housing and the installation location should not be deformed, modified or tampered with.
3.
The electric power supply cables must not show any damage. Have a qualified technician maintain the
device.
4.
Disconnect the device from the mains prior to maintenance activities.
5.
Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.
6.
There are no user-serviceable parts, apart from the lamp (see “
5. Installation
”).
7.
Contact your dealer for spare parts if necessary.
8.
Technical Specifications
power supply
max. 230Vac/50Hz
power consumption
max. 200W
dimensions
320 x 240 x 120mm
weight 1.5kg
lamp
3 x LAMP60
x
2 (E27 60W/230V R80, incl.)
LAMP60
B
2: blue – LAMP60
G
2: green – LAMP60
O
2: orange – LAMP60
R
2: red
Max. Ambient Temperature
45°C
Use this device with original accessories only. Velleman nv cannot be held responsible in the event of
damage or injury resulted from (incorrect) use of this device. For more info concerning this product
and the latest version of this manual, please visit our website www.hqpower.eu. The information in
this manual is subject to change without prior notice.
©
COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved.
No part of this manual or may be copied, reproduced, translated or reduced to any electronic medium or
otherwise without the prior written consent of the copyright holder.
