VDLL10ST
HQPOWER
4
4. Use
•
Connect the PSU to the stroboscope and the mains.
•
Fix the unit using the bracket or place the unit on a flat and stable surface.
•
Adjust the flashing rate (0.3Hz ~ 8Hz) using the adjustment knob (1).
5. Cleaning and Maintenance
1. All screws should be tightened and free of corrosion.
2. The housing, visible parts, mounting supports and the installation location (e.g. ceiling, suspension, trussing)
should not be deformed, modified or tampered with e.g. do not drill extra holes in mounting supports, do not
change the location of the connections.
3. Moving mechanic parts must not show any signs of wear and tear.
4. The electric power supply cables must not show any damage. Have a qualified technician maintain the device.
5. Disconnect the device from the mains prior to maintenance activities.
6. Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.
7. There are no user-serviceable parts.
8. Contact your dealer for spare parts if necessary.
6. Technical Specifications
Power Supply
6VDC/200mA PSU (incl.)
LEDs
10 RGB LEDs
Power Consumption
max. 10W
Dimensions
132 x 90 x 55mm
Total Weight
155g
Use this device with original accessories only. Velleman nv cannot be held responsible in the event of
damage or injury resulted from (incorrect) use of this device. For more info concerning this product, please
visit our website www.hqpower.eu. The information in this manual is subject to change without prior notice.
Summary of Contents for ILCE001
Page 2: ......
