VDPL300MF2_v5
HQPOWER
5
•
Slave Mode
Switches 1 ~ 9 have no function
ON
OFF
1 2 3 4 5 6 7 8 9 10
7. DMX512 Mode
When operating the
VDPL300MF2
through a DMX controller, you can create your own programs and tailor them to
your own needs. Each individual fixture is controllable through a standard DMX controller. To run your projector in
DMX mode, connect a controller using a standard DMX cable. Press MODE until
D.XXX
is displayed. Set the DMX
address.
•
Detailed DMX Values per Channel
Channel Function
From
To
Description
1 Mode
0 24
Dimmer
mode
25 49
Auto
1
50 74
Auto
2
75 99
Auto
3
100 124
Auto
4
125 149
Auto
5
150 174
Auto
6
175 199
Auto
7
200 224
Auto
8
225 249
Auto
9
250 255
Sound
mode
2
Red
0
255
Brightness from 0 to 100%
3
Green
0
255
Brightness from 0 to 100%
4
Blue
0
255
Brightness from 0 to 100%
5
Speed
0
255
Auto / strobe speed from slow to fast
6
Dimmer
0
255
Brightness from 0 to 100%
•
DMX512 Connection
Connect the provided XLR cable to the female 3-pin XLR output of your controller and the other side to the male 3-
pin XLR input of the
VDPL300MF2
. Multiple
VDPL300MF2
s can be linked through serial linking. The linking cable
should be a two-core screened cable with XLR input and output connectors.
•
DMX512 Chain with Termination
A DMX terminator is recommended for installations where the DMX cable has to run a
long distance or is in an electrically noisy environment (e.g. discos). The terminator
prevents corruption of the digital control signal by electrical noise. The DMX terminator is
simply an XLR plug with a 120
Ω
resistor between pins 2 and 3, which is then plugged into
the XLR output socket of the last device in the chain.
Please see illustrations.
