HM-Z3 User Manual
8
2.2 Bluetooth
1. Press and hold MODE button for approx. 2 seconds, and printer is turned on.
Then, it is ready to pair with another Bluetooth device.
2. If necessary, enter the following information into the terminal that you are using.
PIN: 1234 (default)
Device name: “HM-Z3-XXXXX”(default)
(XXXXX is the last digits of the Product Serial Number)
Notes:
1.HM-Z3 has two Bluetooth modes:
a) One is Bluetooth Ver3.0 with PIN for Android or Windows system. PIN and Device name can be
changed through Star Utility. To obtain this utility, please contact with your dealer.
b) Another is Bluetooth 4.0(BLE) without PIN for iOS system.
2.HM-Z3 changes the Bluetooth mode automatically by host system
3.Pairing sets one by one in order, otherwise it can‘t figure out which one succeeds in pairing.
