FC53-Li/FC53-Lc/FC53-Ri/FC53-Rc User Manual
Rev.2.0
75
DB15 Pin Signal Definition
Pin
Definition
Type
1
DC +24V
POWER
2
“Start Print” signal input, provided by PNP sensor
(proximity switch) or + 24V switch;
INPUT
3
GND (0V working ground of the system);
POWER
4
User can customize digital input 1 provided by PNP
sensor (proximity switch) or + 24V switch;
INPUT
5
NC
Reserve
6
NC
Reserve
7
Machine fault signal output, the signal relay contact
is opened when an error occurs;
Output
signals for a
group of
faults
8
Machine fault signal output, the signal relay contact
is opened when an error occurs;
9
Machine warning signal output, signal relay contact is
closed when warning;
Output
signals for a
set of
warnings
10
Machine warning signal output, signal relay contact is
closed when warning;
11
User-definable output 1 #;
OUTPUT
12
GND (0V working ground of the system)
POWER
13
User-definable output 2 #;
OUTPUT
14
NC
Reserve
15
NC
Reserve
“Start Print” input port:
A. Generate "Start Print" signal with PNP sensor
Please connect as follows:
(1) Connect the detection signal line of the PNP sensor to pin 2 of DB15 "Start printing"
(2) Connect the ground wire of the PNP sensor to pin 3 "GND" of DB15
(3) Connect the power cord of the PNP sensor to pin 1 of DC15 "DC + 24V"
Note: Each time the "Start Print" signal changes from low to high, the TTO printer will execute
a print job!
B. Generate "Start Print" signal with + 24V switch
Please connect as follows:
+24V switch is connected to pin 1 and pin 2 of DB15
Note: Every time the +24V switch is closed and the “Start Print” signal changes from low to
high, the TTO printer will perform a printing task! That is, the +24 switch completes a pinch
cycle, and the printer executes the print job only once.
6. RJ-45 10M/100Mbps
（
IEEE802.3 10/100BASE-T
）
Connect to the RJ-45 network port of the printer, send print data and accept the status
information/ version information of the printer.
7. DC +24Vpower connector, 4pin pins (2 pins+24V, 2 pins GND)
8. AC mains input port with ground wire (L,N,PE), power switch, fuse.
