Operation Instruction:
Note:
Please read this manual and its instructions carefully before use.
• This product must be used as per these instructions.
• For indoor use only.
• Please check that this product’s connector sockets and voltage are compatible with your devices’ in accordance
with their instruction manuals.
• Always check for any damage on cord or connectors before use. Using damaged cords may lead to electric shock or fire.
• This product should not be used in areas exposed to constant vibration, temperature fluctuations, or areas of high humidity.
• This product contains no serviceable parts and no attempt should be made to repair this product. If the product is
faulty it should be discarded.
• This product has been designed to operate in ambient temperatures 5°C to 25°C occasionally reaching 35°C.
• This product is only suitable for information technology equipment.
• This product must be used in well ventilated area. Do not operate the charger in a bag or inside a closet or any closed space.
• Do not apply excessive force on the cord while in use.
• Do no place any object on the cord while in use.
• Do not unplug connectors by pulling the cord.
• Do not place the device and cord close to heating elements.
• The material in this product may vary in colour from batch to batch. Colour matching from one batch to another
cannot be guaranteed.
• This product must be cleaned only with a dry soft cloth. Avoid using any wet medium for cleaning.
• Keep the charger out of reach of children.
• While in use, avoid placing charger on a carpet, bed or uneven surface as it will trigger the built-in safety protection
and switch the charger OFF.
• Electrical installations periodically receive transient over voltages. This product has been designed to minimise the effect
of such voltages on connected equipment. It may not give full protection for extreme over voltage transients such as those
resulting from a close lighting strike.
• This product has been designed to operate on a nominal supply voltage of 100- 240V ~ +/- 6% 50/60 Hz
• This product utilises intellectual property in the form of registered designs, trademarks, and/or patents. Such intellectual
property remains the property of Legrand in all cases
• Legrand reserves the right to modify the specification of this product at any time.
Warranty
Legrand Australia Pty Ltd will honour all statutory guarantees that you as a consumer
are entitled to rely upon under the Australian and New Zealand Consumer Laws against a
manufacturer, including a guarantee that this product is of acceptable quality.
To make a claim under any statutory guarantee you should first contact the supplier, or
retailer from whom you purchased this product.
Customer Service
For all Customer Service and Technical Support
please call Monday to Friday during business hours.
Legrand Australia
1300 369 777
www.hpm.com.au
Legrand New Zealand
0800 476 009
www.hpm.co.nz
ABN: 31 000 102 661
LE10458AAB
LEG2193_C
10_2018
Product Notes:
1. Connect this charging station to the power outlet with the attaching power cord. (See picture A)
2. Turn on the switch, then the LED indicator becomes green.
3. Plug your devices into the USB-A ports or USB-C port (5V 2.4A per port), it will start to charge your device. (See picture B)
4. Putting your smart phone on the wireless charging pad, it starts to charge your phone. (See picture C)
5. The wireless Charger pad works with fully Qi-Enabled devices like iPhone X, iPhone 8, 8 Plus, Samsung Galaxy Note 8, S8, S8 Plus, S7, S7
Edge, S6, S6 Edge and other Qi-enabled devices.
Caution: This product is rated 60W. If the used power exceeds 60W, the Wall Charger will switch to Overload protection mode and ‘SHUT DOWN’.
When the Wall Charger is re-plugged to the socket and connection is restored, if the load is within 60W, it will resume to normal operation.
