TREADMILL
E&OE
© 2017 HPF
13
Securing the Running Belt
Place treadmill on a level surface. Run Treadmill at approximately 6-8KM/H,
checking the running condition.
If the belt has drifted to the right, pull out of the save clock and switch, turn the
right adjusting bolt 1/4 turn clockwise, then start running until the belt is centred
(pic A).
If the belt has drifted to the left, pull out of the safety clock and switch, turn the
left adjusting bolt 1/4 turn clockwise, then start running until belt is centred (pic
B).
Timely adjust the tightness of the belt for the looseness after a period of time
running. Pull out of the safety clock and switch , turn the left and right adjusting
bolt 1/4 turn clockwise ,then re-start running, confirm the belt-tightness until the
belt be right tightness (pic C).
