M8000 Multi-Function Home Gym
E&OE
©2017 HPF
10
Step 5
1. Attach the pull unit (
09
) to the bridge tube (
08
), insert the pull unit axle (
21
) through 2 metal bushings
(
31A
) and secure using 2 washers (
36
) and 2 nuts (
40
).
2. Attach the right-hand butterfly arm (
10R
) to the right side of the pull unit (
09
) through 2 metal bushings
(
31
) and secure using 2 washers (
36
) and 1 nut (
40
). Perform the same procedure to attach the left-hand
butterfly arm (
10L
) to the pull unit (
09
).
3. Insert the rubber stop (
52
) to the bracket on the upright support tube (
05
), then adjust the pull unit (
09
) to
match the hole in the bracket.
4. Place the butterfly arm pads (
53
) onto the butterfly arms (
10R
and
10L
), then insert a 50mm flat cap (
46
)
to the ends of the butterfly arms.
5. Attach a handlebar (
11
) to the right-hand butterfly arm (
10R
) and secure using 3 bolts (
22
) and 3
washers (
33
). Perform the same to attach the handlebar (
11
) to the left-hand butterfly arm (
10L
).
6. Attach the pulley bracket (
20
) to each side of the main support tube (
05
) and secure using 2 bolts (
23
), 4
washers (
35
) and 2 nuts (
39
).
