1
Overview
This document describes 10-Gigabit transceiver modules and cables available for HPE Comware-
based devices.
List of 10-Gigabit transceiver modules and
network cables
Transceiver module type
Connector type
SFP+ transceiver modules
SFP+ optical transceiver module
LC
SFP+ copper cable (for interconnecting devices)
N/A
SFP+ active optical cable
XFP transceiver modules
10-Gigabit small form-factor pluggable (XFP) module (transceiver)
LC
CX4 copper cables
10-Gigabit CX4 copper cable (for interconnecting devices)
N/A
NOTE:
•
HPE 10-Gigabit transceiver modules and cables are subject to change over time. For the most
recent list of HPE 10-Gigabit transceiver modules and cables, contact HPE technical support or
marketing staff.
•
The available transceiver modules and cables vary by HPE devices. For the transceiver
modules and cables available for a device, see the installation guide for the device. For the 10-
Gigabit transceiver modules and cables for a switch, see "
10-Gigabit Ethernet transceiver
".
About optical transceiver modules
Optical transceiver modules (also called fiber transceiver modules) transmit signals over optical
fibers and are suitable for long distance transmission.
The following information explains the major specifications of a fiber transceiver module.
Data rate
Data rate is the number of bits transmitted per second. Data rate is typically measured in Gigabits
per second (Gbps).
Transmission distance
The transmission distance of optical transceiver modules is divided into short and long-range types.
Typically, a distance of 2 km (1.24 miles) or below is short-range type and a distance of 10 km (6.21
miles) is long-range type.
Summary of Contents for X130 10G SFP+ LC LH80
Page 4: ...ii Index 59...