manualshive.com logo in svg

HPE StoreOnce 6500, User Manual, Page: 158 / 258

Share
Download
HPE StoreOnce 6500 User Manual Download Page 158

Data type

Description

Device type

The type of device: StoreOnce Catalyst, NAS share, or VTL.

Status

Device status can be one of the following:

• Running: The device has some jobs currently running, which could be

backup/restore or replication.

• Online: The device has no jobs currently running, and is available for

backup/restore or replication.

• Unknown: Host appliance registration has not been completed

• Unable to connect: A connection to the remote appliance cannot be

made. This could be due to the remote appliance rebooting or shutting
down, network connectivity issues, or invalid credentials.

• Failed to start: Device has failed to start replication.

• Fault: Device has a fault condition.

Appliance address

The IP address of the appliance hosting the device.

Service set

N/A or any number up to 8, depending on how many couplets are
represented on the device.

Device throughput reports

NOTE: 

The time zone of the report is shown on the upper right of the screen.

When the Appliance/Virtual Device is in the UTC time zone, the custom time period selection will use the
browser time zone from where you are accessing Reporting Central.

To obtain a device throughput report:

Procedure

1.

On the 

Reports

 page, select 

Device

.

2.

In the 

Group

 menu, select the device group you want to run a report for.

3.

Click 

Select Device

 and select up to five devices. Click 

OK

.

4.

In the 

Period

 menu, select the time frame you want throughput data for.

The resulting graphs show data points for the selected time period, with time and date stamps on the x
axis, and throughput on the y axis. The upper graph shows throughput for the selected devices. The
lower graph shows the throughput for replication sources or targets (VTL or NAS devices) or inbound
and outbound copy jobs (StoreOnce Catalyst). To the right of each graph, the selected devices and
device names will be shown. The lower graph will also show labels for source, target, inbound, or
outbound copy job information.

You can export the graphs; see 

Exporting Reporting Central reports

 on page 147 for details.

158

 Device throughput reports

Summary of Contents for StoreOnce 6500



































































































































































































































































Reviews:

No comments