HPE StoreOnce 6500, User Manual, Page: 147 / 258

4. At the entry screen for the wizard, click Next .
5. In the Modify Libraries screen, select the library you want to remove in the Selected Libraries
window. Click < to move the selected library to the other window. Repeat for any additional libraries
you need to remove from device groups.
6. In the Modify Shares screen, select the share you want to remove in the Selected Shares window.
Click < to move the selected share to the other window. Repeat for any additional shares you need to
remove from device groups.
7. In the Catalyst Stores screen, select the store you want to remove in the Selected Catalyst Stores
window. Click < to move the selected store to the other window. Repeat for any additional stores you
need to remove from device groups.
8. Click Finish . When you complete the wizard, any devices that you removed from the Selected side of
the screen will be deleted.
Exporting Reporting Central reports
You can export most Reporting Central reports.
Procedure
1. Navigate to Reporting Central and the report of interest.
2. Set up the report as needed using the selection boxes and filters.
3. Just to the left of the Export button, select whether to export the file as
.csv
or
.png
.
4. Click Export .
• To
.csv
: You are prompted to open or save the file.
• To
.png
: The graph opens in a new browser window (you may need to temporarily allow pop-ups
in your browser). Right-click the image in the new window and select "Save picture as...." The exact
wording depends on your browser.
In some browsers, you can right-click the graph directly from the Reporting Central page and select
"Export to PNG" to open a Save window. The exact wording and process depends on your browser.
NOTE: Depending on the number of data points available for the X axis, the data might be sampled
to make the graphs more readable. This usually means displaying a longer time period than you
selected.
Appliance reports
Appliance group reports contain data about configured groups of remote StoreOnce Systems. There are
four types of appliance reports you can run:
• Appliance status reports on page 148
• Appliance throughput reports on page 151
• Stream count reports on page 151
• Appliance storage reports on page 152
Exporting Reporting Central reports 147