an SSL certificate from a CA, you must import the self-signed certificate of each appliance you wish to
register and generate reports for in Reporting Central.
After completing the steps in this procedure, you must also complete the following procedures to finalize
appliance registration:
•
on page 138
•
on page 139
To add your appliance to
Reporting Central
:
Procedure
1.
On your local StoreOnce appliance, navigate to the
Appliance Registration
page, and click
Register
.
2.
Enter the following details to register your StoreOnce appliance.
Field name
Description
Appliance Address
Enter your appliance’s IP address in this required field.
IPv4/IPv6 or FQDN
Select one, depending on your entry in the IP address field.
• IPv4/IPv6: Internet Protocol Version 4 or Version 6
• FQDN: Fully Qualified Domain name
User Name
Enter the user name. This must be an account on the remote appliance
that can log into the GUI and CLI. The account credentials will be used by
Reporting Central to log into the remote appliance and retrieve the
information required to generate the reports.
Password
Enter the password associated with the user name above.
Alias
Enter an identifiable name for your appliance.
3.
Click
OK
.
4.
To continue appliance registration, go to
Exporting a certificate
Export the SSL certificate from your remote appliance for use in completing your appliance registration
with your local StoreOnce System.
Procedure
1.
In a new browser, log in to the StoreOnce Management Console (GUI) for the remote appliance you
are registering.
2.
Navigate to
Device Configuration
>
User Interface
>
SSL certificate
.
3.
Click on the
Modify
tab.
4.
In the Create Self-Signed Certificate window, change the name from
localhost
to the IP of the
device.
138
Exporting a certificate