5.
Using the holes provided in the rear rack rails, install
the tie wraps and route external cables as required as
shown in Figure 5.
Figure 4: Cable management with tie wraps
6.
Connect all power cords to the facility power source.
3. Cabling the HPE Storage File Controller
system to the network
The iLO network port is used to remotely manage the
Storage File Controller hardware and allows
administrators to launch a remote console session to the
system. HPE recommends that you connect the iLO port
to your management network. The iLO port is
preconfigured to obtain an IP address through DHCP. If
your environment does not support DHCP, use a KVM
and configure iLO to use a static IP address. For
instructions, see the
HPE Storage File Controller System
Administrator Guide
.
The 4 x 1GbE network ports are used for the storage
network and to connect the system to infrastructure
services such as, Active Directory, DNS, NTP, and so on.
The ports can be configured as segregated network
ports or a network team. Ensure that your switch is
prepared for either configuration.
Item
Description
1
Slot 1 PCIe3
2
Slot 2 PCIe3
3
Slot 3 PCIe3 (optional - requires second processor)
4
Power supply 2 (PS2)
5
Power supply 1 (PS1)
6
Video port
7
NIC port 4
8
NIC port 3
9
NIC port 2
10
NIC port 1
11
iLO Management Port
12
Serial port (optional)
13
USB 3.0 ports
14
FlexibleLOM (optional)
Page 5