HPE ProLiant XL645d, User Manual

Page: 52 / 120

Item Component Function
1 Serial port Connect a null modem serial cable to perform diagnostic procedures.
1
2 USB 2.0 Type-A ports (2)
2
Connect USB devices.
3 iLO service port • Connect a FAT32 formatted USB flash drive
3
to download the Active
Health System log.
• Connect a client system using a supported USB to Ethernet adapter and
access the iLO web interface, remote console, CLI, and iLO RESTful API.
For more information, see the iLO user guide on the HPE website (
https://
www.hpe.com/support/ilo-docs).
4 VGA port Connect an analog display device.
5 SUV connector Connect to the server SUV port.
1
For trained personnel only
2
These ports do not support USB devices that require a power source greater than 500 mA at 5 V.
3
A USB device connected to the iLO service port is not accessible to the host operating system.
Using the SUV cable in a KVM setup
Procedure
1. Connect the SUV cable to the SUV port.
2. Connect a monitor to the VGA port.
3. Connect a USB mouse to one of the USB ports.
4. Connect a USB keyboard to the other USB port.
Using the SUV cable to access a USB drive in a KVM setup
The USB ports on the SUV cable do not support USB devices that require a power source greater than 500 mA at 5 V.
When accessing this type of USB drives, such as a USB key or a USB optical drive, use a USB hub in a KVM setup.
Hardware options installation
52