b.
Disconnect all cables from the expansion board.
c.
Remove the expansion board.
7.
Remove the secondary riser slot 3 transfer board.
To replace the component, reverse the removal procedure.
Removing and replacing the primary riser board
CAUTION:
Before replacing a DIMM, expansion board, or other similar PCA components due to a
perceived hardware error, make sure first that the component is firmly seated in the slot. Do not
bend or flex circuit boards when reseating components.
50
Removal and replacement procedures
Summary of Contents for ProLiant DX190r Gen10
Page 21: ...Customer self repair 21...
Page 22: ...22 Customer self repair...
Page 23: ...Customer self repair 23...
