HPE ProLiant DX190r Gen10, Maintenance And Service Manual

Page: 104 / 130

3
If the component is installed in server 1, and the server is installed in the Apollo DX2200 Gen10 Chassis, drive blanks
must be installed in drive bays 1-2 and 2-2. Similarly, if the component is installed in server 3, and the server is
installed in the Apollo DX2200 Gen10 Chassis, drive blanks must be installed in drive bays 3-2 and 4-2. For more
information, see
Installing drive blanks and thermal bezel blanks for components with thermal limitations on
page 35.
FlexibleLOM adapters with SFP+, SFP28 or QSFP transceivers
Chassis Fan configuration Number of drives
supported by the server Maximum inlet ambient
temperature
Apollo DX2200
Gen10 Chassis
(12 LFF backplane)
Redundant and
nonredundant 5 to 6 drives
1
Optical cable: Not
supported
Copper cable: 30°C
(86°F)
5 to 6 drives
2
Not supported
0 to 4 drives
3
Optical cable: 25°C
(77°F)
Copper cable: 30°C
(86°F)
Apollo DX2600
Gen10 Chassis
(24 SFF or 16 SFF
+ 8 NVMe
backplane)
Redundant and
nonredundant 0 to 10 drives Optical cable: 25°C
(77°F)
Copper cable: 30°C
(86°F)
Apollo DX2800
Gen10 Chassis
(24 SFF backplane
with SAS expander)
Redundant and
nonredundant 0 to 24 drives Optical cable: 22°C
(71.6°F)
Copper cable: 30°C
(86°F)
Apollo DX2800
Gen10 Chassis
(16 NVMe
backplane)
Redundant and
nonredundant 0 to 8 drives Optical cable: 25°C
(77°F)
Copper cable: 30°C
(86°F)
1
The drive capacity must be less than 10 TB.
2
The drive capacity must be greater than or equal to 10 TB.
3
If the component is installed in server 1, and the server is installed in the Apollo DX2200 Gen10 Chassis, drive blanks
must be installed in drive bays 1-2 and 2-2. Similarly, if the component is installed in server 3, and the server is
installed in the Apollo DX2200 Gen10 Chassis, drive blanks must be installed in drive bays 3-2 and 4-2. For more
information, see
Installing drive blanks and thermal bezel blanks for components with thermal limitations on
page 35.
104 Specifications