HPE
HPE Basic Drive LED definitions
Basic Drive LED definitions
LFF
LFF low-profile drive carrier
low-profile drive carrier
The LFF low-profile drive carrier supports hot-plug SAS and SATA drives.
SFF
SFF basic drive carrier
basic drive carrier
The SFF basic drive carrier supports hot-plug SAS, SATA, and NVMe drives.
Item
Item
LED
LED
Status
Status
Definition
Definition
1
Fault/Locate
Solid amber
This drive has failed, is unsupported, or is invalid.
Solid blue
The drive is operating normally and being identified by
a management application.
Flashing amber/blue (1 flash
per second)
The drive has failed, or a predictive failure alert has
been received for this drive. The drive has also been
identified by a management application.
Flashing amber (1 flash per
second)
A predictive failure alert has been received for this
drive. Replace the drive as soon as possible.
2
Online/Activity
Solid green
The drive is online and has no activity.
Flashing green (1 flash per
second)
The drive is doing one of the following:
Rebuilding or performing a RAID
Performing a stripe size migration
Performing a capacity expansion
Performing a logical drive extension
Erasing
Spare part activation
Flashing green (4 flashes per
second)
The drive is operation normally and has activity.
Off
The drive is not configured by a RAID controller or is a
spare drive.
HPE Basic Drive LED definitions
237
Summary of Contents for ProLiant DL360
