HPE OfficeConnect 1950 Series User Manual Download Page 22

Page: 22 / 182

Menus Tasks

ARP

•

Manage dynamic ARP entries and static ARP entries.

•

Configure

ARP

proxy.

•

Configure

gratuitous

ARP.

•

Configure ARP attack protection.

DNS

•

Configure IPv4 static domain name resolution.

•

Configure IPv4 dynamic domain name resolution.

•

Configure the DNS proxy.

•

Configure IPv4 domain name suffixes.

Dynamic DNS

•

Manage dynamic DNS policies.

•

Configure an interface to be associated with the dynamic DNS policy.

IPv6

IPv6

•

Configure the method to obtain an IPv6 address (manual assignment,
dynamic assignment, or auto generation).

•

Configure the IPv6 address of an interface.

•

Create a loopback interface.

•

Manage dynamic ND entries and static ND entries.

•

Configure the aging time for stale ND entries.

•

Minimize link-local ND entries.

•

Configure hop limit.

•

Configure RA prefix attributes, including:

{

Address prefix.

{

Prefix length.

{

Valid lifetime.

{

Preferred lifetime.

•

Configure RA settings for an interface, including:

{

RA message suppression.

{

Maximum and minimum intervals for sending RA messages.

{

Hop limit.

{

M-flag.

{

O-flag.

{

Router lifetime.

{

NS retransmission interval.

{

Router preference.

{

Neighbor reachable time.

•

Enable common and local ND proxy on an interface.

•

Configure ND rules for the interface.

DNS

•

Configure static and dynamic IPv6 domain name resolution.

•

Configure the IPv6 DNS proxy.

•

Configure IPv6 domain name suffixes.

Mirroring

Port Mirroring

•

Configure local mirroring groups.

•

Configure remote mirroring groups.

Routing

Routing Table

Display IPv4 and IPv6 routing table information, including brief routing table
information and route statistics.

Summary of Contents for OfficeConnect 1950 Series























































































































































































Search results

Summary of Contents for OfficeConnect 1950 Series

Reviews:

Related manuals for OfficeConnect 1950 Series

Brands by name

Popular brands

HPE OfficeConnect 1950 Series, User Manual

Search results

Summary of Contents for OfficeConnect 1950 Series

Reviews:

Related manuals for OfficeConnect 1950 Series

Brands by name

Popular brands