HPE LSQM2MPUD0, Manual

Page: 4 / 4

Manual version: 6PW108-20180130 BOM: 3123A0XN
iv
Module
Central
wavelength
Connector
Fiber
specifications
Maximum
transmission
distance
QSFP-40G-LR4-WDM1300
1271 nm
1291 nm
1311 nm
1331 nm
LC 9/125 µm SMF 10 km (6.21 miles)
QSFP-40G-LR4L-WDM1300
1271 nm
1291 nm
1311 nm
1331 nm
LC 9/125 µm SMF 2 km (1.24 miles)
QSFP-40G-ER4-WDM1300
1271 nm
1291 nm
1311 nm
1331 nm
LC
9/125 µm
single-mode optical
fiber
40 km (24.86 miles)
NOTE:
•
The QSFP-40G-LR4-WDM1300 cannot be connected to the 10-Gbps SFP+ module.
•
The QSFP-40G-LR4L-WDM1300 is supported only if the software version of the device is
Release 7536P07 or later.
Table 5 describes the QSFP+ cables that used for connecting 40G QSFP+ ports.
Table 5 QSFP+ cable specifications
QSFP+ cable Cable length Data rate Cable type
LSWM1QSTK0 1 m (3.28 ft) 40 Gbps QSFP+ cable
LSWM1QSTK1 3 m (9.84 ft) 40 Gbps QSFP+ cable
LSWM1QSTK2 5 m (16.40 ft) 40 Gbps QSFP+ cable
Table 6 describes the specifications of the QSFP+ fiber cables that used for connecting 40G QSFP+
ports.
Table 6 QSFP+ fiber cables available for the QSFP+ ports
QSFP+ fiber cable Cable length Data rate Remarks
QSFP-40G-D-AOC-7M 7 m (22.97 ft)
40 Gbps
For connecting 40G QSFP+
ports
QSFP-40G-D-AOC-10M 10 m (32.81 ft)
QSFP-40G-D-AOC-20M 20 m (65.62 ft)
3 Related documentation
For module installation, see
H3C S7500E Switch Series Installation Guide
.
For software upgrade, see the release notes for the device.
Copyright © 2014-2018 New H3C Technologies Co ., Ltd.
The information in this document is subject to change without notice.