HPE JH182A, User Manual, Page: 7 / 8

7
Figure 3 Installing the LSWM124XGT2Q interface module
Removing the interface module
CAUTION:
•
Before you remove the interface module, remove the cable
from it to avoid cable damage.
•
If you are not to install a new interface module,, install a filler
panel in the slot to prevent dust and ensure good ventilation in
the device.
To remove the interface module:
1.
Prepare an anti-static bag.
2.
Press the latch to release the ejector lever
3.
Rotate outward the ejector lever, as shown by callout 1 in Figure
4 .
4.
Pull the interface module slowly out of the interface module slot,
as shown by callout 2 in
Figure 4 .
5.
Place the removed interface module in the anti-static bag.
Figure 4 Removing the LSWM124XGT2Q interface module