NonStop System With Data Center UPS, Both Power Rails
In this non-supported configuration, a NonStop system is installed in a Tier-I, Tier-II or Tier-III
data center. The data center tier classification is defined by the
Classifications Define Site Infrastructure White Paper
IMPORTANT:
If this configuration is used, there is no guarantee that your data center will
never lose power.
shows an example of a non-supported configuration in a NonStop system with the left
and right PDUs connected to the data center UPS. In this configuration, OSM does not manage
or monitor the data center UPS.
Figure 37 NonStop System With Data Center UPS, Both Power Rails
Non-Supported UPS Configurations
117
