HPE FlexNetwork 7500 Switch Installation Manual Download Page 105

Page: 105 / 149

Table 44 Power supply status LED description (2)

LEDs

Description

OK FAIL

Off

The corresponding power supply is operating correctly.

Off On

The corresponding power supply is not outputting power because one
of the following conditions exists:

•

The power supply is faulty or switched off.

•

The power cord is disconnected.

•

The external power supply is unavailable.

Off

No power supply is installed in the corresponding slot.

Table 45 Power supply status LED description (3)

OK/FAIL LED status

Description

Steady green

All power supplies are operating correctly.

Steady red

A power supply is not outputting power because one of the following
conditions exists:

•

The power supply is faulty or switched off.

•

The power cord is disconnected.

•

The external power supply is unavailable.

Off

•

No power supply is installed.

•

No power supply is outputting power because one of the
following conditions exists:

{

The power supplies are faulty or switched off.

{

The power cords are disconnected.

{

The external power supply is unavailable.

Fan tray status LEDs

Fan tray status LED varies by MPU model.

•

If the MPU provides one set of LEDs (OK and FAIL) to indicate the status of the fan tray,
see

Table 46

for the LED description.

•

If the MPU provides one OK/FAIL LED to indicate the status of the fan tray, see

Table 47

for the

LED description.

Table 46 Fan tray status LED description (1)

OK LED
status

FAIL LED
status

Description

Off

The fan tray is operating correctly.

Off

A fan problem has occurred or the fan tray is not in position.

Off

The switch is not powered on.

Table 47 Fan tray status LED description (2)

OK/FAIL LED status

Description

Steady green

The fan tray is operating correctly.

Steady red

A fan problem has occurred or the fan tray is not in position.

Summary of Contents for FlexNetwork 7500 Switch






















































































































































Search results

Summary of Contents for FlexNetwork 7500 Switch

Reviews:

Related manuals for FlexNetwork 7500 Switch

Brands by name

Popular brands

HPE FlexNetwork 7500 Switch, Installation Manual

Search results

Summary of Contents for FlexNetwork 7500 Switch

Reviews:

Related manuals for FlexNetwork 7500 Switch

Brands by name

Popular brands