HPE FlexNetwork 10500 SERIES, Configuration Manual

Page: 357 / 407

346
CWMP configuration example
Network requirements
As shown in Figure 98 , use HPE IMC BIMS as the ACS to bulk-configure the devices (CPEs), and
assign ACS attributes to the CPEs from the DHCP server.
The configuration files for the devices in equipment rooms A and B are configure1.cfg and
configure2.cfg , respectively.
Figure 98 Network diagram
Table 40 shows the ACS attributes for the CPEs to connect to the ACS.
Table 40 ACS attributes
Item Setting
Preferred ACS URL http://10.185.10.41:8080/acs
ACS username Admin
ACS password 12345
Table 41 lists serial numbers of the CPEs.
Table 41 CPE list
Room Device Serial number
A
Device A 210231A95YH10C000045
Device B 210235AOLNH12000010
Device C 210235AOLNH12000015
Device A Device B Device C
Room A
Device D Device E Device F
Room B
ACS
10.185.10.41
DHCP server
10.185.10.52 DNS server
10.185.10.60