162
Step Command
Remarks
4.
Return to system view.
quit
N/A
5.
Enter interface view.
interface
interface-type
interface-number
N/A
6.
Specify the NAS-ID profile on
the interface.
portal
nas-id-profile
profile-name
By default, no NAS-ID profile is
specified on the interface.
Configuring the local portal Web server feature
To perform local portal authentication for users, perform the following tasks:
•
Configure a local portal Web server.
•
Configure a name for the portal Web server and specify a local IP address of the device as the
server's URL.
•
Enable portal authentication on the user access interface.
•
Specify the portal Web server on the portal-enabled interface.
During local portal authentication, the local Web portal server pushes authentication pages to users.
You must customize the authentication pages and upload them to the device. On the device, specify
an authentication page file as the default authentication page file for local portal authentication.
Customizing authentication pages
Authentication pages are HTML files. Local portal authentication requires the following
authentication pages:
•
Logon page
•
Logon success page
•
Logon failure page
•
Online page
•
System busy page
•
Logoff success page
You must customize the authentication pages, including the page elements that the authentication
pages will use, for example,
back.jpg
for authentication page
Logon.htm
.
Follow the authentication page customization rules when you edit the authentication page files.
File name rules
The names of the main authentication page files are fixed (see
). You can define the names
of the files other than the main authentication page files. File names and directory names are case
insensitive.
Table 16 Main authentication page file names
Main authentication page
File name
Logon page
logon.htm
Logon success page
logonSuccess.htm
Logon failure page
logonFail.htm
Online page
Pushed after the user gets online for online notification
online.htm
Summary of Contents for FlexFabric 5940 SERIES
Page 251: ...238 ...
