31
Figure 39 Removing the filler panel
Keep the removed filler panel secure for future use.
3.
Unpack the interface module.
Figure 40 LSWM18QC interface module
(1) Ejector lever
(2) Latch
4.
Press the latch on the interface module to release the ejector lever.
5.
Insert the interface module slowly into the slot along the guide rails, as shown by callout 1
in
6.
Rotate inward the ejector lever as shown by callout 2 in
until the latch locks the
ejector lever in place.
Figure 41 Installing an LSWM18QC interface module
1
2
