23
Setting the aging timers for dynamic ports globally
Step
Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter IGMP-snooping view.
igmp-snooping
N/A
3.
Set the aging timer for
dynamic
router
ports
globally.
router-aging-time seconds
The default setting is 260
seconds.
4.
Set the global aging timer for
dynamic member ports
globally.
host-aging-time seconds
The default setting is 260
seconds.
Setting the aging timers for dynamic ports in a VLAN or VSI
Step
Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter VLAN view or VSI
view.
•
Enter
VLAN
view:
vlan vlan-id
•
Enter
VSI
view:
vsi
vsi-name
N/A
3.
Set the aging timer for
dynamic router ports in the
VLAN or VSI.
igmp-snooping
router-aging-time seconds
The default setting is 260
seconds.
4.
Set the aging timer for
dynamic member ports in the
VLAN or VSI.
igmp-snooping host-aging-time
seconds
The default setting is 260
seconds.
Configuring static ports
You can configure the following types of static ports:
•
Static member port
—When you configure a port as a static member port for a multicast group,
all hosts attached to the port will receive multicast data for the group.
The static member port does not respond to IGMP queries. When you complete or cancel this
configuration on a port, the port does not send an unsolicited IGMP report or leave message.
•
Static router port
—When you configure a port as a static router port for a multicast group, all
multicast data for the group received on the port will be forwarded.
To configure a port as a static port:
Step
Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter Layer 2 Ethernet
interface view or Layer 2
aggregate interface view.
interface
interface-type
interface-number
N/A
3.
Configure the port as a static
port.
•
Configure the port as a static
member
port:
igmp-snooping
static-group
group-address
[
source-ip source-address
]
vlan
vlan-id
•
Configure the port as a static
router
port:
By default, a port is not a static
member port or a static router
port.
