HPE FlexFabric 12900E LSXM1TGS24QGMODHB1, Quick Start Manual, Page: 5 / 5

Manual version: 5P101-20171120 BOM: 3123A1NA Part number: 5200-4100
v
Figure 2 Removing the filler panel from the expansion slot
2. Unpack the interface card and press the latch to release the ejector lever.
3. As shown by callout 1 in Figure 3 , insert the interface card slowly into the slot along the guide
rails.
4. As shown by callout 2 in Figure 3 , close the ejector lever. The latch automatically locks the
ejector lever and secures the card into place.
Figure 3 Installing an interface card in the expansion slot
4 Obtaining documentation
For card installation, see HPE FlexFabric 12900E Switch Series Installation Guide .
For software upgrade, see HPE FlexFabric 12900E Switch Series Software Upgrade Guide .
To access documentation and support services, go to the Hewlett Packard Enterprise Support
Center website:
www.hpe.com/support/hpesc
The information in this document is subject to change without notice.
© Copyright 2017 Hewlett Packard Enterprise Development LP
1
2
1
1
2