Manual version: 5P101-20171120
BOM: 3123A1NA
Part number: 5200-4100
i
HPE FlexFabric 12900E LSXM1TGS24QGMODHB1
(JH953A) interface card
1 Card identifier
The card identifier LSXM1TGS24QGMODHB1 is at the upper right corner of the front panel.
2 Specifications
CAUTION:
This card can be used only with Type H switching fabric modules, which have a character string of
SFH
in their card identifiers (for example, LSXM1
SFH
16C1). Card damage will occur if this card is
used with a switching fabric module that is not Type H.
NOTE:
Switching fabric module slots are covered by fan trays. To verify the card identifiers of the switching
fabric modules while the switch is operating, use the
display device
command.
Multiple interface cards are available for the expansion slot on the card. The following figure uses an
LSWM124XGT2Q interface card as an example.
Figure 1 Front panel
(1) SFP+ port
(2) QSFP+ port
(3) Expansion slot
(4) Ejector lever
(5) QSFP+ port LED
(6) SFP+ port LED
Table 1 Card specifications
Item
Specification
Processor
MIPS64 (Dual Core) @ 1.2 GHz
SDRAM
8 GB DDR3 SDRAM
Power consumption
125 W to 296 W
Fixed ports
•
24 × 10G SFP+ port
•
2 × 40G QSFP+ port
1
2
4
5
6
3