2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where
components and materials requiring selective treatment can be removed.
Tool Description
Tool Size (if
applicable)
Description #1 Torx screwdriver
T9
Description #2 Static electric tweezers
NA
Description #3 Phillips screwdriver
PH2
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective
treatment:
1.
Use Phillips screwdriver to remove the 2 screws on the
MNT bracket
.
2. Use T9 screwdriver to remove the 4 screws on the chassis.
3. Will the unit,open the top cover with 90 angle from USB side.Use static electric tweezers to
remove the antenna cable from the PCBA.
4. Remove the top cover,use PH2 Phillips screwdriver to remove 3 screws on the
LED guide
beam and PCBA.
5. Remove the PCBA and LED guide beam from the chassis.
