c.
Disconnect the OCP network adapter from the system board.
d.
Tilt the OCP network adapter away from the rear bracket.
To replace the component, reverse the removal procedure.
Removing and replacing the OCP air baffle
CAUTION:
For proper cooling, do not operate the server without the baffles, expansion slot covers,
or blanks installed.
Procedure
on page 23.
2.
Disconnect all peripheral cables from the server.
on page 24.
40
Removal and replacement procedures
Summary of Contents for AR64z
Page 18: ...18 Customer self repair...
Page 19: ...Customer self repair 19...
Page 20: ...20 Customer self repair...
