• Avoid touching pins, leads, or circuitry.
• Always be properly grounded when touching a static-sensitive component or assembly. Use one or
more of the following methods when handling or installing electrostatic-sensitive parts:
◦ Use a wrist strap connected by a ground cord to a grounded workstation or computer chassis. Wrist
straps are flexible straps with a minimum of 1 megohm ±10 percent resistance in the ground cords.
To provide proper ground, wear the strap snug against the skin.
◦ Use heel straps, toe straps, or boot straps at standing workstations. Wear the straps on both feet
when standing on conductive floors or dissipating floor mats.
◦ Use conductive field service tools.
◦ Use a portable field service kit with a folding static-dissipating work mat.
If you do not have any of the suggested equipment for proper grounding, have an authorized reseller
install the part.
For more information on static electricity or assistance with product installation, contact an authorized
reseller.
Locating the IP address
Procedure
1.
Press the Power On/Standby button.
2.
Access the Aptio V Setup Utility. During POST, press
Del
or
Esc
.
3.
Select
Server Mgmt
>
BMC network configuration
, and then press
Enter
.
4.
Note the station IP address value.
OS deployment options
• For single server OS deployment,
use an OS installation media (USB key or DVD)
.
• For multiple server OS deployment in a cluster,
use HPE Performance Cluster Manager
Deploying an OS from an installation media
Procedure
1.
Verify that the OS is supported:
http://www.hpe.com/info/ossupport
2.
Insert the installation media.
3.
Do one of the following:
• If you are managing the server locally, access the AMI Aptio V Setup Utility by pressing
Del
or
Esc
during POST, and then set the boot option priority by selecting
Boot
>
Boot Option Priorties
.
• If you are managing the server remotely, in the Java console window, select
Media
>
Virtual Media
Wizard
, and then select the OS installation media.
4.
Deploy the OS.
24
Setup
