AP-505H-MNT2 Mount Kit
Installation Guide
0512198-01 | May 2020
1
The AP-505H-MNT2 is designed to secure 505H Series access points to a dual-gang wall box according to the
installation procedure provided in this guide.
Package Contents
Double gang wall mount bracket
Side cover
(x4) #6-32x1 Phillips drive screws
(x2) M2.5 x 6.5 T8H Security Type Tamper Proof Torx screw
Installation
1. If the wall box is not already exposed, unscrew and remove the existing wall plate, as shown in
.
Figure 1
Remove Existing Wall Plate
2. If needed, detach any RJ45 cables by unclipping the connectors from the wall plate.
3. Align the screw holes on the mounting bracket with the corresponding holes on the wall box.
A #1 Phillips and T8H screwdriver are required for installation.
This mount kit supports dual gang wall boxes for the 505H Series access points.