Figure 46: SFP+ network cable
(1) Connector
(2) Pull latch
For more information about the SFP transceiver modules, SFP+ transceiver modules, and SFP+ network cables, see HPE
Comware-Based Devices Transceiver Modules User Guide.
NOTE:
• As a best practice, use HPE 1000 Mbps SFP transceiver modules, SFP+ transceiver modules, or SFP+ network cables for
the SFP+ ports on the switch. The HPE SFP and SFP+ transceiver modules and SFP+ network cables are subject to change
over time. For the most up-to-date list of SFP and SFP+ transceiver modules and SFP+ network cables, contact your
Hewlett Packard Enterprise sales representative or technical support engineer.
• The HPE 5900AF-48G-4XG-2QSFP+ and HPE 5900AF-48G-4XG-2QSFP+ TAA switches do not support the SFP-XG-
LX220-MM1310 transceiver module.
QSFP+ port
HPE 5900 switches provide QSFP+ ports. You can plug the QSFP+ transceiver modules in
Table 11: 40G QSFP+ transceiver
modules available for the HPE 5900 switches on page 64 and the QSFP+ network cables in Table 12: 40G QSFP+
network cables available for the HPE 5900 switches on page 65 in the QSFP+ ports as needed.
Table 11: 40G QSFP+ transceiver modules available for the HPE 5900 switches
Product code
HPE
description
Central
wavelength
(nm)
Connector
Fiber diameter
(
μ
m)
Modal
bandwidth
(MHz x km)
Max
transmissions
distance
JG325B
HPE X140 40G
QSFP+ MPO
SR4 Transceiver
850
MPO
Multi-mode,
50/125
2000
100 m (328.08
ft)
4700
150 m (492.12
ft)
JG709A
HPE X140 40G
QSFP+ MPO
MM 850nm
CSR4 300m
Transceiver
850
MPO
Multi-mode,
50/125
2000
300 m (984.25
ft)
Table Continued
64 Ports and LEDs
