HPC MLFPK Series, Installation & Operation Instructions

Page: 2 / 11

2
4/24/2017 870-MLFPK
Index:
1) Parts List
2) General Information
3) Selecting the Location
4) Construction of Fire Pit Enclosure
5) Construction of LP Tank Enclosure (Select models only)
6) Installation of Fire Pit
7) Media Application
8) Fire Pit Operation
9) Maintenance
10) Troubleshooting
11) Replacement Parts
12) Warranty
1. Parts List

Fire Pit Insert

Installation and Operation Instructions
2. General Information
Instructions are also available at hpcfire.com

Please carefully follow the instructions in this manual to prevent personal injury or property loss.
Instructions are updated as needed. It is the installer’s responsibility to periodically review instruction
for applicable updates. These instructions contain information critical to the safe installation and
operation of the fire pit.

To qualify for warranty, instructions must be strictly followed . Warranty may be void if not followed.
Never alter product or configuration in any way.

IMPORTANT:
It is the installer’s responsibility to ensure a safe installation and to educate the end
user as to proper operation. Leave this manual with the end user.

We suggest that our products be installed by professionals that are locally licensed by the authority
having jurisdiction in gas piping. We suggest that our products be serviced annually by a professional
certified in the US by the National Fireplace Institute (NFI) as NFI Gas Specialists or in Canada by
WETT (Wood Energy Technical Training). Installer must follow all instructions carefully to ensure
proper performance and safety. Hearth Products Controls Company is not responsible for your actions.

It is the responsibility of the installer to follow:
o
The National Fuel Gas Code , ANSI Z223.1/NFPA 54 or International Fuel Gas Code.
o
The National Electrical Code, ANSI/NFPA 70 .
o
Local Codes

Only use gas/fuel type specified for this fire pit refer to label on the fire pit control Box. Never use an
alternative fuel to include bio-fuel, ethanol, lighter fluid or any other fuel.
Gas pressure and type should be checked prior to use and installation.
o
Natural Gas Fire Pit:
Supply Pressure: Minimum: 3.5” W.C.; Maximum: 7.0” W.C.
o
LP Gas:
Supply Pressure: Minimum: 8.0” W.C.; Maximum: 11.0” W.C.
IMPORTANT:
Ensure any flex line that may be used from the permanent main fuel supply to the
product is rated to the stated max BTU of the product and certified to ANSI Z21.75*CSA 6.27.