HPA QA4150, Owner'S Manual

Page: 14 / 16

12
QA4150 / QA4300
QA 4150 QA 4300
Rated Output Power Stereo Four Channel Driven
8 ohms 100 W 200 W
4 ohms 150 W 300 W
Rated Output Power Bridged Mono
8 ohms 300 W 600 W
Signal to Noise Ratio
(20 Hz ~ 20k Hz)
100dB 100dB
Distortion (SMPTE-IM) 0.05% 0.05%
Input sensitivity @8 ohms 4dBu 4dBu
Voltage Gain 27dB 30dB
Output Circuitry AB AB
Current Consumption 120Vac / 240Vac
@ 1/8 power @4 ohms 5.0A / 2.4A 9.5A / 4.6A
@ 1/3 power @4 ohms 7.5A / 4.0A 14.5A / 7.4A
@ Rated power @4 ohms 11.0A / 5.8A 1.5A / 11.2A
Distortion
0.01% 0.01% 20 Hz-20k Hz Half Power
1k Hz Rated Power
0.1% 0.1%
Frequency Response 0/-0.5dB ; 20Hz-20KHz, 0/-3dB ; 5Hz-60KHz
Damping Factor (400 Hz) 200 200
Input Impedance 15Kohm Unbalanced, 30Kohm Balanced
Input Clipping 22dBu (10Vrms)
Cooling Continuously variable speed, Front to rear
Connectors (each)
Input Active balanced combo (XLR and 1/4” TRS common use)
Output 5-way Binding post and Speakon
Control
Front AC power switch, Channel 1 & 2 & 3 & 4 volume
Rear Mode selector switch
Indicators Active(blue), Protection(red), Clip(yellow), Signal (green)
Protection
Short circuit, Thermal, Current limit, Current inrush, RF protection, Turn on / Turn
off muting
Power requirements 100, 120/240Vac, 50/60Hz
Dimensions (W × H × D) 19”(482mm) × 3.5”(88mm) × 16.5”(420 mm)
Net Weight
40 lb
(20.9 kg)
51.1 lb
(23.2 kg)
Necessary modifications are carried out without notice.
Specifications
Specifications