HPA M1636FX, Owner'S Manual

Page: 18 / 24

16
M1636FX / M2436FX Specifi cations
Specifi cations
*0dB=0.775Vrms, 0dBV=1Vrms
- GENERAL
Maximum Output Level
(0.5% T.H.D at 1kHz) +26dB(MAIN L/R) @10k Ω , +20dB(GROUP1-2/3-4, AUX1,AUX2/EFX, CTRL ROOM) @10k Ω ,
+20dB(INSERT) @10k Ω , More than 100mW(HEADPHONES) @33 Ω
T.H.D
<0.1% @+14dB 20Hz ~ 20kHz (MIX L/R, GROUP1-2/3-4, AUX 1/AUX2/EFX SEND, CTRL
ROOM) @10k
Ω
Frequency Response
20Hz ~ 20kHz, +1/-2dB (MIX L/R, GROUP1-2/3-4, AUX1/AUX2 /EFX SEND, CTRL ROOM)
@10k
Ω
Hum and Noise (Average,
Rs=150
Ω )
-127dB equivalent input noise; -95dB residual noise (MIX L/R, GROUP1-2/3-4, AUX1/AUX2/EFX
SEND, CTRL ROOM OUT); -88dB (MIX L/R, GROUP1-2/3-4, AUX1/AUX2/EFX SEND, CTRL
ROOM OUT) * Master fader at nominal level and all channel assign switches off.
Maximum Voltage Gain
74dB MIC IN TO Main L/R; 74dB MIC IN TO GROUP1-2/3-4; 66dB MIC IN TO AUX 1/AUX2(PRE); 76dB
MIC IN TO AUX 2(POST); 76dB MIC IN TO EFX; 80dB MIC IN TO CONTROL ROOM L/R; 52.2dB MIC
IN TO REC L/R; 54dB LINE IN TO MIX L/R; 54dB LINE IN TO GROUP1-2/3-4; 46dB LINE IN TO AUX
1/AUX2(PRE); 56dB LINE IN TO AUX 2(POST); 56dB LINE IN TO EFX; 60dB LINE IN TO CONTROL
ROOM L/R ; 44dB ST IN TO MAIN L/R; 44dB ST IN TO GROUP1-2/3-4; 16dB AUX RETURN IN TO MIX
L/R; 12dB AUX RETURN IN TO AUX1/AUX2; 20dB TAPE IN TO MAIN L/R
Crosstalk (at 1kHz) -70dB between input channels ;-70dB between input/output channels
Gain Control
(mono Input Channel)
44dB Variable (-50dB ~ -6dB), (-30dB ~ +14dB)
Gain Control(mono/stereo
combination Input ch)
40dB Variable (-20dB ~ +20dB)
Monaural Input Channel
Equalization HIGH: 12kHz shelving, MID : 100-8 kHz peaking LOW: 80Hz shelving * Turnover/roll off frequen-
cies: located 3dB below maximum boost/cut
Stereol Input Channel
Equalization HIGH: 12kHz shelving, HIGH MID : 3kHz peaking LOW MID: 500Hz peaking LOW: 80Hz shelving
* Turnover/roll off frequencies: located 3dB below maximum boost/cut
Graphic Equalizer 7-band (63,160,400, 1K, 2.5K, 6.4K, 16KHZ)
LED Meters 10-Segment LEDx2 MAIN L/R, GROUP1-2/3-4, PFL(Selectable)
Internal Digital Effect
100 selectable presets
FOOT switch (ON/OFF)
Channel Indicators
Peak: An indicator for each channel turns on when the pre-channel fader signal is 5dB below
clipping.
Phantom Power
(Balanced input)
+48V DC
Included Accessory Power adaptor PA-M1224 For M1636FX / PA-M2436 For M2436FX
Power Source
USA and Canada: 120V AC, 60Hz
Europe: 230V AC, 50Hz
England and Australia: 240V AC, 50Hz
Korea: 220V AC, 60Hz
Power Consumption M1636FX: 40W / M2436FX: 55W
Weight M1636FX: 5.36kg M2436FX: 7.60kg
Dimensions(W x D x H)mm M1636FX: 436 x 420 x 90mm M2436FX: 652 x 420 x 90mm