HPA E3i, Owner'S Manual

Page: 13 / 16

E3i / E5i / E7i
11
Specifications
Specifications
Necessary modifications are carried out without notice.
E3i E5i E7i
Output Power Stereo Both Channel Driven
8 ohms 300 W 500 W 700 W
4 ohms 420 W 700 W 1000 W
Signal to Noise Ratio
(20 Hz ~ 20k Hz)
100 dB 100 dB 100 dB
Input sensitivity @8 ohms 5 dBu 5 dBu 5 dBu
Voltage Gain at 8 ohms 32 dB 34.5 dB 36 dB
Output Circuitry AB AB AB
Curent Consumption 230Vac
@ 1/8 power @4 ohms 3.3 A 2.68 A 3.98 A
@ 1/3 power @4 ohms 5 A 6.8 A 8.2 A
@ Rated power@4ohms 7.95 A 11.9 A 17.6 A
Cooling
0.01% 0.01% 0.01%
20 Hz-20k Hz HalPower
1k Hz Rated Power 0.1% 0.1% 0.1%
Frequency Response 0/-1dB ; 20Hz-20KHz
nput Impedance 15Kohm Unbalanced, 30Kohm Balanced
Input Clipping 22dBu (10Vrms)
Cooling Continuously variable speed, Front to rear
Connectors (each)
Input
Active balanced XLR and 1/4” TRS
Output 5-way Binding post and Speakon
Control Front AC power switch, Channel 1 and 2 volume
Protection
Short circuit, Thermal, Current limit, DC offset, Current inrush, Turn on / Turn off
muting
DSP
Display 2x16 Character LCD
Modes Manual mode, 2 Full Range, Mono 2-Way, Sub/Sat, 2 Subs
I/O Settings
Stereo, Mono A+B Dual, Mono A+B Link, Parallel A Dual, Parallel
A Link
Digital Dynamics function Filter, Crossover, Gain Offset, EQ, Limiter
Digital Delay Function Max 20ms per channel
Digital EQ function per channel
f0: 1/12 Octave at 20~20kHz, Gain: +/- 12dB, Q: 0.5~5.0
Presets: DJ, Vocal, Live Sound, Install, Rock, Dance and Jazz
Setup Factory Reset
Power requirements 230Vac, 50/60Hz
Dimensions (W × H × D) 482 × 88 × 330mm
Net Weight 12.45Kg 12.24Kg 13.56Kg