HP ZHAN 66 Pro 14 G3 Maintenance And Service Manual Download | Manualshive

Page: 77 / 98

background image

If your PC does not start in Windows, you can use HP PC Hardware Diagnostics UEFI to diagnose hardware
issues.

When HP PC Hardware Diagnostics UEFI detects a failure that requires hardware replacement, a 24-digit
Failure ID code is generated. For assistance in solving the problem:

▲

Select Contact HP, accept the HP privacy disclaimer, and then use a mobile device to scan the Failure ID
that appears on the next screen. The HP Customer Support - Service Center page appears with your
Failure ID and product number automatically filled in. Follow the on-screen instructions.

– or –

Contact support, and provide the Failure ID code.

NOTE:

To start diagnostics on a convertible computer, your computer must be in notebook mode, and you

must use the attached keyboard.

NOTE:

If you need to stop a diagnostic test, press

esc

.

Starting HP PC Hardware Diagnostics UEFI

To start HP PC Hardware Diagnostics UEFI, follow these steps:

1.

Turn on or restart the computer, and quickly press

esc

.

2.

Press

f2

.

The BIOS searches three places for the diagnostic tools, in the following order:

a.

Connected USB flash drive

NOTE:

To download the HP PC Hardware Diagnostics UEFI tool to a USB flash drive, see

Downloading the latest HP PC Hardware Diagnostics UEFI version on page 69

b.

Hard drive

c.

BIOS

3.

When the diagnostic tool opens, select a language, select the type of diagnostic test you want to run,
and then follow the on-screen instructions.

Downloading HP PC Hardware Diagnostics UEFI to a USB flash drive

Downloading HP PC Hardware Diagnostics UEFI to a USB flash drive can be useful in the following situations:

●

HP PC Hardware Diagnostics UEFI is not included in the preinstallation image.

●

HP PC Hardware Diagnostics UEFI is not included in the HP Tool partition.

●

The hard drive is damaged.

NOTE:

The HP PC Hardware Diagnostics UEFI downloading instructions are provided in English only, and you

must use a Windows computer to download and create the HP UEFI support environment because only .exe
files are provided.

Downloading the latest HP PC Hardware Diagnostics UEFI version

To download the latest HP PC Hardware Diagnostics UEFI version to a USB flash drive:

1.

Go to

http://www.hp.com/go/techcenter/pcdiags

. The HP PC Diagnostics home page is displayed.

2.

Select Download HP Diagnostics UEFI, and then select Run.

Using HP PC Hardware Diagnostics UEFI

69

«
...
75
76
77
78
79
...
»

Summary of Contents for ZHAN 66 Pro 14 G3



































































































Reviews:

No comments

Related manuals for ZHAN 66 Pro 14 G3

5315 2326 - Aspire

Brand: Acer Pages: 115

5315 2326 - Aspire

Brand: Acer Pages: 110

6460 6263 - TravelMate

Brand: Acer Pages: 138

5610 4179 - Aspire

Brand: Acer Pages: 99

5315 2326 - Aspire

Brand: Acer Pages: 110

Brand: Acer Pages: 315

Brand: XMG Pages: 23

Brand: Dell Pages: 18

Brand: Fujitsu Pages: 100

Brand: Gateway Pages: 72

Brand: Gateway Pages: 116

Brand: Gateway Pages: 146

Brand: Gateway Pages: 152

Brand: Gateway Pages: 147

Brand: Gateway Pages: 146

Brand: Gateway Pages: 182

Brand: Clevo Pages: 101

Brand: Prestigio Pages: 36

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands