manualshive.com logo in svg

HP ZHAN 66 Pro 14 G2, Maintenance And Service Manual

Share
Download
HP ZHAN 66 Pro 14 G2 Maintenance And Service Manual Download Page 11

1

Product description

Table 1-1

  Product components and their descriptions

Category

Description

Product Name

HP ZHAN 66 Pro 14 G2 Notebook PC

Processors

8th generation, Intel® Core™ (15 W)

i7-8565U, 1.8 GHz/4.6 GHz, quad core turbo, 8 MB L3 cache; Intel UHD Graphics 620

i5-8265U, 1.6 GHz/3.9 GHz, quad core turbo, 6 MB L3 cache; Intel UHD Graphics 620

Graphics

Supports HD decode, DX12, HDMI 1.4b up to 4K 30 Hz, HDCP 2.2 via DisplayPort

Supports 3 independent displays when on the HP USB-C Dock G4; Max resolution = 4K @ 30 Hz 
(DisplayPort 1) or 4K @ 30 Hz (DisplayPort 2)

Supports 3 independent displays when on the HP TB Dock 120 W (using USB-C); Max resolution = 4K @30 
Hz (DisplayPort 1) or 4K @ 30 Hz (DisplayPort 2)

Integrated Intel UMA Graphics

Integrated with shared video memory (see Processors category)

Discrete graphics memory

NVIDIA® GeForce® MX250 with 2 GB of dedicated video memory

Supports CUDA, Optimus, PhysX, GPU Boost 2.0

Panel

35.6 cm (14.0 in), FHD (1920 × 1080), LED backlight, UWVA, IPS, slim, two WLAN antennas

220 nits, 45% CG, eDP

400 nits, 72% CG, eDP + PSR

Memory

Two customer-accessible memory module slots supporting up to 32 GB of RAM

Supports dual-channel memory

PC4-2400, DDR4 SODIMMs

Supports the following configurations:

●

32768 MB (16384 × 2; dual channel)

●

16384 MB (16384 × 1)

●

16384 MB (8192 × 2; dual channel)

●

8192 MB (8192 × 1)

●

4096 MB (4096 × 1)

Cache

Intel Optane 16 GB memory cache

Primary storage

Supports the following SATA, 7 mm, 2.5-inch hard drives:

●

1 TB, 5400 rpm

●

500 GB, 7200 rpm

1

Summary of Contents for ZHAN 66 Pro 14 G2




































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands