manualshive.com logo in svg

HP ZBook x2, Maintenance And Service Manual, Page: 49 / 91

Share
Download
HP ZBook x2 Maintenance And Service Manual Download Page 49

Wireless antenna

Description

Spare part number

Wireless antenna (includes main and auxiliary wireless antenna cables, transceivers, and double-
sided adhesive)

L03255-001

Before removing the wireless antenna, follow these steps:

1.

Shut down the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, 
and then shut it down through the operating system.

2.

Disconnect all external devices connected to the tablet.

3.

Disconnect the power from the tablet by first unplugging the power cord from the AC outlet, and then 
unplugging the AC adapter from the tablet.

4.

Remove the display panel assembly (see 

Display panel assembly on page 30

).

Remove the wireless antenna:

1.

Disconnect the wireless antenna cables from the WLAN terminals on the system board.

NOTE:

The #1 WLAN antenna cable connects to the WLAN module "#1/Main" terminal. The #2 WLAN 

antenna cable connects to the WLAN module "#2/Aux" terminal.

2.

Detach the wireless antenna auxiliary transceiver (2) from the back cover. (The wireless antenna auxiliary 
transceiver is attached to the back cover with double-sided adhesive.)

3.

Detach the wireless antenna main transceiver (3) from the back cover. (The wireless antenna main 
transceiver is attached to the back cover with double-sided adhesive.)

4.

Release the wireless antenna main cable from the retention clips (4) built into the back cover.

Component replacement procedures

41

Summary of Contents for ZBook x2




























































































Reviews:

No comments