HP ZBook 15u G4 Maintenance And Service Manual Download Page 134

Page: 134 / 196

No video (external)

Symptom

No image on external monitor

Possible causes

External monitor, resolution, display configuration, drivers.

Troubleshooting steps

Be sure external monitor is compatible with the computer.

Be sure that external monitor is turned on.

Press any key to get out power saving mode.

Adjust the brightness of the monitor.

Test with a verified working monitor.

Test the monitor via internal ports (VGA, DP ports).

Install latest video driver.

Reset the screen resolution as described in the documentation.

Configure display choice, and then force output to external video by closing the
notebook lid or pressing

Fn + F4

to switch screen output.

DisplayPort/VGA

See

No video (external) on page 122

HDMI

Symptoms

●

Display issue

●

Sound issue

Possible causes

Cable, connection, settings.

Troubleshooting steps

Quick Check

Verify HDMI device input source is set correctly (i.e., HDMI1).

Be sure you are using the correct HDMI cable.

Check connection and reconnect the HDMI cable.

Verify if sound output is configured correctly in Control Panel > Sound Manager.

Perform hard reset (

4. Update BIOS and drivers on page 87

Update BIOS and drivers (

4. Update BIOS and drivers on page 87

) when sound is heard but

no video on HDTV.

References

HP Notebook PCs - Troubleshooting HDMI Display and Sound Issues

122 Chapter 8 Troubleshooting guide

Summary of Contents for ZBook 15u G4





































































































































































































Search results

Summary of Contents for ZBook 15u G4

Reviews:

HP ZBook 15u G4, Maintenance And Service Manual, Page: 134 / 196

Search results

Summary of Contents for ZBook 15u G4

Reviews: