manualshive.com logo in svg

HP ZBook 15u G4, Maintenance And Service Manual, Page: 12 / 196

Share
Download
HP ZBook 15u G4 Maintenance And Service Manual Download Page 12

Changing the boot order using the f9 prompt ................................................................................ 159

TPM BIOS settings (select products only) .........................................................................................................  160
Using HP Sure Start (select products only) .......................................................................................................  160

10  Using HP PC Hardware Diagnostics (UEFI) ................................................................................................... 161

Downloading HP PC Hardware Diagnostics (UEFI) to a USB device ..................................................................  161

11  Backup and recovery ................................................................................................................................  163

Creating recovery media and backups ..............................................................................................................  163

Creating HP Recovery media (select products only) ....................................................................... 163

Using Windows tools .........................................................................................................................................  164
Restore and recovery ......................................................................................................................................... 165

Recovering using HP Recovery Manager ........................................................................................  165

What you need to know before you get started ........................................................... 165
Using the HP Recovery partition (select products only) ..............................................  166
Using HP Recovery media to recover ............................................................................ 166
Changing the computer boot order ..............................................................................  167
Removing the HP Recovery partition (select products only) .......................................  168

12  Specifications .......................................................................................................................................... 169

Computer specifications .................................................................................................................................... 169
39.6-cm (15.6-in) display specifications ..........................................................................................................  170
Solid-state drive specifications ......................................................................................................................... 170
Hard drive specifications ...................................................................................................................................  171

13  Power cord set requirements ....................................................................................................................  172

Requirements for all countries .......................................................................................................................... 172
Requirements for specific countries and regions .............................................................................................  172

14  Statement of memory volatility ................................................................................................................ 174

Nonvolatile memory usage ...............................................................................................................................  177
Questions and answers .....................................................................................................................................  179
Using HP Sure Start (select models only) .......................................................................................................... 180

15  Recycling ................................................................................................................................................  181

Index ...........................................................................................................................................................  182

xii

Summary of Contents for ZBook 15u G4





































































































































































































Reviews:

No comments