manualshive.com logo in svg

HP Z38c, User Manual

Share
Download
HP Z38c User Manual Download Page 10

Rear components

Component

Function

1

Master power switch

Turns off all power to the monitor.

NOTE:

Putting the switch in the Off position will yield the lowest power 

state for the monitor when not in use.

2

Power connector

Connects AC power.

3

HDMI port

Connects an HDMI cable to the source device.

4

DisplayPort port

Connects a DisplayPort cable to the source device.

5

Audio out (headphone) jack Connects optional powered stereo speakers, headphones, earbuds, a 

headset, or a television audio cable.

WARNING!

To reduce the risk of personal injury, reduce the volume before 

using headphones, earbuds, or a headset. For additional safety information, 

see the Product Notices provided on the optical disc, if one is included with 

your product.

6

USB Type-A ports (2) 

(downstream)

Connects a USB device.

7

Security cable slot

Connects a security cable to a stationary object.

8

USB Type-A port with 

battery charging 1.2 

(downstream)

Connects a USB Type-A cable to the source device.

9

USB Type-C port 

(upstream)

Connects a USB Type-C cable to the source device.

NOTE:

The USB Type-C port can also function as a USB upstream port when connected to a USB Type-C source 

device.

The USB Type-C port can function as a DisplayPort audio/video input, as a USB 3.0 upstream connection, or it can be 

used to deliver up to 65 watts of power to a device. Power outputs are 5 V/12 V/20 V to achieve 15 W output.

4

Chapter 1   Getting Started

Summary of Contents for Z38c































Reviews:

No comments

Brands by name

Popular brands

Load more brands