background image

National keyboard delimiter characters

Each keyboard meets country-specific requirements. The syntax and keys you use for changing or deleting 
passwords depend on the keyboard included with the computer.

Language

Delimiter

 

Language

Delimiter

 

Language

Delimiter

Arabic

/

 

Greek

-

 

Russian

/

Belgian

=

 

Hebrew

.

 

Slovakian

-

BHCSY

 *

-

 

Hungarian

-

 

Spanish

-

Brazilian

/

 

Italian

-

 

Swedish/Finnish

/

Chinese

/

 

Japanese

/

 

Swiss

-

Czech

-

 

Korean

/

 

Taiwanese

/

Danish

-

 

Latin American

-

 

Thai

/

French

!

 

Norwegian

-

 

Turkish

.

French Canadian

é

 

Polish

-

 

U.K. English

/

German

-

 

Portuguese

-

 

U.S. English

/

*

Bosnia-Herzegovina, Croatia, Slovenia, and Yugoslavia

Clearing passwords

If you forget the password, you cannot access the computer.

For instructions about clearing passwords, see 

Resetting the password jumper on page 69

.

Chassis security

Smart Cover Sensor

The Smart Cover Sensor, an optional feature, is a combination of hardware and software technology that 
alerts you if the interior or the computer is accessed (provided the sensor has been configured in Computer 
Setup (F10) Utility). The sensor alerts you when the side panel is removed (desktop and tower models) or 
when the computer is opened (all-in-one models). When the Smart Cover Sensor is installed, Smart Cover 
appears under the Security menu in the Computer Setup (F10) Utility menu.

Three levels of protection are available:

Level

Setting

Description

Level 0

Disabled

Sensor

 *

 is disabled (default).

Level 1

Notify User

When the computer restarts, a message indicates that the computer has been 
opened or the access panel has been removed.

*

Smart Cover Sensor settings can be changed using Computer Setup (F10) Utility.

32

Chapter 2   System management

Summary of Contents for Z1 G3




























































































Reviews: