Preparations for a disk array system:
•
Confirm the requirements of the disk array system. See
“Storage requirements” (page 25)
•
Perform the prerequisite tasks of the disk array system. See
.
Table 7 Prerequisite tasks for the disk array system
Snapshot
Business Copy
Item
Do not care
Enable license key for a
backup using Business
Copy function
Business Copy
Paid Option
Enable license key for a
backup using the Snapshot
function (SS)
Do not care
Snapshot
Enable license key for a
backup using the Snapshot
function (FS)
Do not care
Fast Snap
Enable license key
LUN Manager
Enable license key when using the Thin Provisioning
function.
Thin Provisioning
Enable license key when using High Availability function.
High Availability
The pair status should be
PAIR. The pair status of the
Create one or more S-VOLs
for the target P-VOL.
Pair status
target P-VOL does not
matter. Even an SMPL
status is acceptable.
*When VSS Provider
creates a V-VOL
dynamically during a backup
and creates a Snapshot
pair, do not exceed the
maximum number of pairs
allowed in the disk array
system.
Also, as one Snapshot pair
is created dynamically by
one backup operation, make
the number of pairs less
than the maximum number
when performing a parallel
backup in consideration of
the number of backups
performed in parallel.
Prepare one or more data
pool for a backup when
Not required for Business
Copy
Data pool
using the Snapshot function
(SS).
For the setting size, see
Snapshot User's Guide.
Prepare one or more data
pool for a backup when
Not required for Business
Copy
Fast Snap pool
using the Snapshot function
(FS). For the setting size,
see Fast Snap User's
Guide.
Turn on mapping mode (Each host port on the disk array
system.)
Host port
46
Configuration Procedure
Summary of Contents for XP
Page 51: ...5 Missing number 51 ...
