Diskette Drive Installation
HP Workstation xw Series
This document describes how to install a diskette drive.
Kit Contents
This product is shipped with the necessary supplies for installing a diskette drive in various workstation
models, so you might not use all of the cables, bezels, or screws.
■
Diskette drive
■
Cables
❏
HP Workstation xw8200 and HP Workstation xw6200—round cable
❏
HP Workstation xw4200 and HP Workstation xw4100—flat cable
■
Three bezels (one for each workstation)
❏
HP Workstation xw8200—5.25-inch bezel
❏
HP Workstation xw6200—3.5-inch bezel (thinner than the xw4200 and xw4100)
❏
HP Workstation xw4200 and HP Workstation xw4100—3.5-inch bezel (thicker than the xw6200)
■
Screws (xw8200, xw4200, and xw4100 only)
■
Bracket (xw8200 only)
Gather your Supplies
■
Option kit
■
Printed copies of relevant workstation documentation, which can be found at
http://www.hp.com/support/workstation_manuals
Installing a Diskette Drive
For product-specific information, refer to the
Service and Technical Reference Guide
for your HP
http://www.hp.com/support/workstation_manuals
.
1. Disconnect power from the system, remove the access panel, the front bezel, the necessary bezel
blank, and the EMI filler blank, if applicable.
