Installing Accessories
Chassis Beam Assembly
Chapter 2
23
Installing the Chassis Beam Assembly
To install the chassis beam assembly:
1. Hook the chassis beam assembly to the left side of the chassis and
rotate it down over the MEC and the graphics card making sure the
MEC and graphics card retainer clips are centered on the cards as
shown in Figure 2-6 and Figure 2-7.
CAUTION
Make sure the retaining clips slide easily over the cards, or the clips
may put undue pressure on the card connectors.
2. Replace the screw that holds the chassis beam assembly in place.
Figure 2-6
MEC Retainer Clip
Retaining clip
on MEC.
This manual downloaded from http://www.manualowl.com
Summary of Contents for Workstation x4000
Page 2: ...This manual downloaded from http www manualowl com ...
Page 10: ...6 This manual downloaded from http www manualowl com ...
Page 15: ...Chapter 2 13 2 Installing Accessories This manual downloaded from http www manualowl com ...
Page 53: ...This manual downloaded from http www manualowl com ...
